No products
Prices are tax excluded
Data sheet
| Weight of base machine (T) | 1-3 |
| Oil flow (L/min) | 25-57 |
| Pressure (bar) | 240 |
| Machine type | Mini-excavator |
| Mounting plate included | No |
| Auger rotation momentum (Nm) | 800-2390 |
| Standard drill length (mm) | 1200 |
| Standard drill diameter (mm) | 150-600 |
| Return pressure (bar) | 28 |
| Drill/extension types | S4 |
| Output shaft diameter (mm) | Circle 65 |
More info
The hydraulic auger is used for drilling holes with diameters ranging from 100 to 450 mm. The Impulse M3 is suitable for installation on micro-excavators or mini-excavators, in other words, machines weighing 1–3 tons. If your machine weighs more than 3 tons, consider the Impulse M5 model.
Sometimes, this hydraulic auger is chosen for self-propelled tracked and wheeled vehicles used to install posts along highways.
The Impulse TechnoPark offers the Impulse M3 hydraulic auger from stock in Moscow and the regions. By purchasing the Impulse M3, you receive warranty and post-warranty equipment support throughout its service life. Hydraulic augers come with a 12-month warranty.
Data required for proper equipment selection:
- Type and weight of the carrier;
- Hydraulic line flow rate (l/min);
- Hydraulic line pressure (Bar);
- Drilling diameter and depth;
- Type of soil.
Our managers are always ready to help you select a hydraulic auger and the appropriate type of adapter suspension for it.
Note! Equipment selection based solely on the carrier's weight is indicative and should not be the final criterion when choosing a hydraulic auger!